Click on the image to check the artwork
Product Description
Material: Cr18, Cr20, Cr25, Cr27, Cr26Ni4，1.4729，1.4777, 1.4776, 1.4823.
Process: Lost Foam Process
Shell Mould Process
Lost wax process
Features of Sinter Grate Bar
a.Using special gauge to check to ensure the size fitts the drawing.
b.Using the X-ray inspection, to ensure that the internal defects of grate bar is not less than the level III JISG0581 provisions.
c.Doing impact test and hardness test, to ensure that impact value of grate bar is not less than JISZ2242 provisions.
Application: It is sintering machine main parts, it is wearing parts.
Casted with your drawing or sample.
http://www.qyhsmachinery.com/